Startek (FM220)

If you need a PC– and also Android Mobile based fingerprint reader, the Startek (FM220) USB fingerprint reader is the product for you. An STQC Certified & Registered Device compliant single fingerprint scanner, this UIDAI approved authentication device was designed specifically to be used for Aadhar.

Fast & Secure

This compact and elegant fingerprint scanner comes with USB 2.0 interface for high-speed transfers. Startek (FM220) also has fast scanning and matching speeds for maximum efficiency. You have the ability to set different security levels for different False Rejection Rates (FRR)/False Acceptance Rates (FAR) demands. It also supports verification on different server platforms.

Practical Usability

The FM220U fingerprint scanner has been successfully tested and deployed in remote corners of India, and it has proven to work in dusty and harsh conditions. Shock-proof to prevent any damage caused by accidents, the FM220U is also protected against dust and water ingress. Its ergonomic design guides the finger to the optimal position for effective scanning. Thus, it not only provides non-distorted image quality, but it also comes with adjustable image magnification to ensure the best success rates when scanning children’s fingerprints. The high image resolution of 600 dpi ensures the highest quality image you could need.

Specifications

Scanning Sensor CMOS sensors
Image Capture Speed 1/15 Second
Image Resolution 500 dpi (H), 500 dpi (V), 600 dpi (optional)
Capture Area 15.44×17.475 (in mm) (HxV)
Plate Area 16.5×19 (in mm) (HxV)
Scanner Output Image Size 264 * 324 pixels or 304 * 344 (optional) (HxV)
Gray Level 8 bit/pixel, max 256 grayscale
Image Ratio of Length to Width Scanner 1:1
Interface Cable Standard USB cable
Power Supply 1 Watt approx. (From USB port) (Approx. 100 mA, standby: 40mA)
Minimum Hardware requirement P3800 Mhz CPU or UP, 256MB, USB 2.0
Dimension 80mm(L) x 41mm(M)x40mm(H)
Weight 100g (approx)
Distortion <1% Meeting PIV specifications
Temperature -5O~45°C, 15 KV
Estimated MTBF >100,000 operation hours
Modulation Transfer Function 0.4 at 10 cycle/mm
Scanning Light source Ultra-red (940mm), capable of supporting more than 600 dpi
Live Scan Capability Live Skin Sensing (with ultra-red scanning beneath skin, optional)
API (ISO19794-2/ISO19794-4 and FIPS 201* Compliant, Minex certified) Image Capture, Enrolment / Template Extraction & Matcher
Minutia Size <1K bytes
Matching Speed <1 second
False Rejection Rate (FRR) 1/100-1/30
False Acceptance Rate (FAR) 1/100,000-1/1000,000
Allowable Fingerprint Rotation 180°
Allowable Fingerprint Displacement + 5mm
Software Platform Windows 2000/2003/XP/Vista/7 (32 bits and 64 bit). Linux with kernel 2.6 (x86); WinCE5.0 (x86 and Arm9), Android

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *